Maintenance Cleaning

Solder Pallet and Condensation Trap Cleaning

During the soldering process, gasses and vapors are emitted from the solder paste. If the condensation traps are not cleaned regularly, these residues will prevent the transfer of heat which can lead to a significant reduction in the level of precipitation.  Regular maintenance cleaning is therefore recommended in order to ensure the functionality and preserve as well as extend the product life of the condensation traps.

[Translate to english south asia:] Media for solder pallets cleaning
[Translate to english south asia:] Agents for solder pallets cleaning

When cleaning solder pallets, mainly severely burnt-in flux residues must be removed as otherwise the proper PCB placement and optimal processing through the wave soldering machine cannot be ensured. This typically leads to uneven solder results on the assembly.

The removal of flux residues from condensation traps and solder pallets can be done manually or by using cleaning equipment. For this purpose, ZESTRON offers various water based maintenance cleaners that remove severely burnt-in flux residues generated by low solid content, colophony containing, synthetic, and water soluble solder pastes as well as clean condensed gas emissions.

Our Application Technology department is pleased to help you find the optimal process for your application! 

Phone: +604-3996 100


Products for cleaning solder pallets and condensation traps


Aqueous alkaline cleaners: