Particle Detected. Risk Understood?

Stefan Strixner


» free «

Brief Insight

Why electrical risk assessment of particles is becoming increasingly critical for modern electronics – and why non-metallic particles and fibres must also be considered

Does every detected particle pose an electrical failure risk? Not necessarily. Discover why conventional cleanliness assessments may overestimate the risks of non-metallic particles and fibres, and how frit-voltage analysis helps distinguish potentially critical contamination from non-critical particles under application-relevant conditions.

Delivery form: PDF



Article number: EN-2611-09


White paper

Particle Detected. Risk Unterstood?

Why electrical risk assessment of particles is becoming increasingly critical for modern electronics – and why non-metallic particles and fibres must also be considered

Abstract

As operating voltages, power densities, and processor clock rates increase, assessing the electrical risks of particulate contamination is becoming increasingly important for the long-term reliability of electronic assemblies.

Conventional Technical Cleanliness assessments focus on particle size, quantity, and material classification. However, these parameters alone cannot determine whether a detected particle poses an actual electrical failure risk. Even non-metallic particles and fibres can change their electrical properties under the influence of moisture, temperature, and high voltages, although their risk potential is often lower than assumed.

This whitepaper examines the limitations of conventional particle cleanliness assessments and explores how frit-voltage analysis can determine the actual electrical risk of metallic and non-metallic contamination under application-relevant conditions. Discover why particle detection alone may lead to misleading risk assessments and how electrical testing can provide a more reliable basis for Technical Cleanliness decisions.



Key Topics

  • Technical Cleanlines is envolving

  • Not every particle is critical

  • Moisture changes the risk profile

  • Temperature and Ageing

  • Why particle counting alone is insufficient

  • Frit-Voltage Analysis: The next step in risk assessment

  • Added value for ZESTRON Customers

 


Category: Technical Cleanliness | Request: Bookmark this

Portrait  S. Strixner, Zestron

Stefan Strixner

Technology Analyst

Stefan Strixner studied Technical Chemistry at the Technical University Georg Simon Ohm in Nuremberg. Since 1992 he has been working at ZESTRON Europe, with varying emphases. As Principal Engineer, he is responsible for setting up the technical and analytical centres worldwide.

He is also an expert in the field of failure causes, reliability and technical cleanliness of electronic assemblies. As part of his work in the ZESTRON Reliability & Surfaces Team, he organises and conducts Technology Coaching sessions on these topics.

Other white papers that may be of interest to you